๐Ÿชš Onefinity CNC Feed & Speed Calculator

Feeds, speeds, depth of cut & runtime estimator for pine and oak โ€” Fable build

Units:
โš ๏ธ Safety notice: These settings are conservative starting estimates. Actual results depend on the router or spindle, bit manufacturer, tool stick-out, workholding, machine rigidity, wood condition, grain direction, and toolpath. Start conservatively, test on scrap material, and monitor sound, chips, heat, vibration, and tool deflection.

๐Ÿ›  Machine & Material

Safety / aggressiveness level is set with the Overall Cutting Intensity slider below.

Machine limits (editable, saved locally)
Material properties (editable, saved locally)

๐Ÿ”ฉ Tool

Edits to diameter, flutes, edge length and stick-out are saved to the selected bit automatically.

๐Ÿ“ Operation & Cut Dimensions

Dimensions

Job details & overrides

๐ŸŽš Adjustments

Very conservativeNormalVery aggressive
50%100%150%
25%100%150%
70%100%120%
25%100%125%
10%55%100%
Best finishBalancedFastest practical
50%100%200%

๐Ÿ”ง Adjust After a Test Cut

Pick the problem you observed on the test cut. Change one variable at a time โ€” it makes troubleshooting far easier.

๐Ÿ’พ Saved Presets

Presets capture the full current setup and its adjusted results. Example presets are starting points saved by this calculator โ€” not manufacturer-approved settings.

๐Ÿงฎ How These Values Were Calculated

Show the live calculation walk-through